PROcise Outdoors
Dek-It Aluminum Dash Mount - Dual or Single Marine Electronics Mounting System
Dek-It Aluminum Dash Mount - Dual or Single Marine Electronics Mounting System
Couldn't load pickup availability
Get your graph up where you can see it. The Dek-It Dash Mount raises your fish finder above the dash, so the steering wheel is no longer in the way of the screen. Choose the Single Unit for one screen, or the Dual Unit to put two screens centered right in front of you so you won’t miss a thing.
Made in USA from 3/16 in thick aluminum, the Dek-It Dash Mount is tournament tested to take punishing runs and keep your electronics from bouncing and wearing on their wires.
Keep your gimbal, lose the glare
Unlike hard mounting in the dash, the Dek-It Dash Mount lets you use the gimbal mount that came with your fish finder. Tilt the screen to cut sun glare.
Fits flat dashes and consoles
The Dek-It Dash Mount fits nearly all boats with a flat dash and many consoles with a flat face. Hole patterns are cut for Humminbird, Lowrance and Garmin electronics, and you can drill your own holes for any other fit.
Specifications
| Spec | Single Unit | Dual Unit |
|---|---|---|
| Screens | 1 | 2, side by side |
| Size | About 10 in long and 2.5 in tall | 24.75 x 3.75 x 3.25 in (L x W x T) |
| Material | 3/16 in thick aluminum | 3/16 in thick aluminum |
| Finish | Powder coated | Powder coated |
| Hole patterns | Humminbird, Lowrance, Garmin | Humminbird, Lowrance, Garmin |
| Made in | USA | USA |
Installation tip
We recommend replacing your boat’s factory dash panel screws with bolts, washers and lock nuts. That upgrade keeps rough water from loosening the factory screws. Dek-It mounts do not come with mounting hardware, because every boat is different, so plan the install first and pick up what you need at the hardware store.
Starting with a Single? Single mounts cannot be converted to dual mounts. To run two screens later, you will replace the Single with the Dual.
Running a Ranger? The factory dash plate on many Ranger boats is light duty tin. See our Ranger DEK-IT Bow and Dash Plates.
Frequently asked questions
Will it fit my dash?
It fits nearly all boats with a flat dash and many consoles with a flat face.
Which fish finders does it fit?
Hole patterns are cut for Humminbird, Lowrance and Garmin. If you need a different pattern, drill your own holes.
Can I use my fish finder’s gimbal mount?
Yes. That is the point of the Dek-It Dash Mount: keep the gimbal so you can tilt the screen and cut glare.
Does it come with mounting hardware?
No. Plan your install, then pick up bolts, washers and lock nuts at the hardware store. We recommend them over the factory dash screws.
Can I turn my Single into a Dual later?
No. Single mounts are not adaptable to dual mounts. The Dual Unit replaces the Single.
Made in USA. Veteran Owned.
